Syntho-Quickset™ Epoxy
PRODUCT INFORMATION
Syntho-Quickset™ is a fast-setting, Kevlar reinforced, adhesive and repair epoxy system.
- Color
- Resin Gray
- Catalyst White
- Viscosity, 25° C, cps
- Resin Paste
- Catalyst 4,000
- Specific gravity, 25° C
- Resin 1.56
- Catalyst 1.1
- Mix ration, by weight (resin: catalyst)
- 100:13
- Thin film set time,25° C
- 1.5 hrs.
- Gel time,100 grams,25° D
- 15 minutes
- Flexural strength, psi
- 16,700
- Flexural modulus, psi
- 377
- Tensile strength, psi
- 9,400
- Tensile modulus, psi
- 493
- Elongation, %
- 2.5
- Bonding applications
- Pipe repairs
- Concrete repairs
- Chemically resistant coatings
- 1 lb. and 4 lb. containers
- Special packaging available upon request
- Sets rapidly in thin films, even under adverse, humid conditions
- Fast setting time
- Good chemical resistance
- DOT Non-corrosive
TESTING DATA & RESULTS
- Gasohol
- Excellent
- Sydrol
- Excellent
- Distilled water
- Excellent
- Inorganic acids
- Excellent
- Alkalies
- Excellent
- Dilute Acetic Acid
- Excellent
C: Continuous Exposure
L: Limited Time or Intermittent Exposure
S: Splash or Spillage
P: Not recommended
PREPARATION & APPLICATION
-
1
Clean and roughen: Surfaces must be clean and grease free. Use an oil-free solvent such as acetone to wipe surfaces. Adhesion can be substantially increased by abrading the surfaces to be bonded with emery cloth, sand paper, carbide grinding tools, sand blasting, carbide grinding tools, sand blasting, etc. A roughened, porous surface will produce the best results. Any oxidized metal films should be removed just prior to application of the epoxy adhesive mixture.
-
2
Mix: Thoroughly mix by weight 100 parts Epoxy to 13 parts Catalyst.
-
3
Application: Apply mixed product within five to ten minutes.
-
4
Storage & Handling
Store in a cool, dry place in original containers. Expected shelf life is one year in original unopened containers. Please read the Material Safety Data Sheet (MSDS) before using this or any other chemicals.