November, 2017

2″ OD Hydrocarbon Branch Enclosure Encapsulation

Atmospheric corrosion is common among offshore pipes. During a routine inspection, severe atmospheric corrosion was noted on a 2” branch connected to a 10” hydrocarbon / water line. Surface preparation was not possible due to the severe corrosion, so NRI recommended a perimeter seal enclosure to encapsulate the entire branch leg. Read more below to […]
Read more

2″ OD Offshore Flare Engineered Enclosure Repair

During a routine inspection, two serious defects were found on a 2″ flare gas line. When NRI was asked to provide the safest repair option, NRI recommended an annular fill purpose built mechanical enclosure. Read more below to find out how this leak was repaired.
Read more

126” Pressure Vessel Composite Leak Repair in Poland

A 12” x 1” crack was identified in the body this soda plant’s pressure vessel in the City of Janikowo, Poland. The needed immediate attention, and the quickest overnight solution were NRI’s epoxy systems. Read more to learn how this leak was fixed.  
Read more

10" OD Tee Repair and Rehabilitation in Mexico

A 10″ OD petroleum line in Mexico was experiencing severe pitting due to atmospheric conditions causing a 50% wall loss over a 2’6″ (0.8m) section. Thermo-Wrap CF (carbon fiber) was used to bring this line back into operation. Read more below.
Read more